In 2011 Britney Spears brought out an album called Femme Fatale. Many people can say she is a perfect example of a Femme Fatale as she is very seductive. Especially in her music video 'Hit Me Baby One More Time' where she dresses up as a sexy school girl and dances around the classroom.
Monday, 5 May 2014
Femme fatale
A femme fatale an attractive but dangerous woman who can be very seductive in her mysterious ways. She can also have an effect when someone falls for her charm.
In 2011 Britney Spears brought out an album called Femme Fatale. Many people can say she is a perfect example of a Femme Fatale as she is very seductive. Especially in her music video 'Hit Me Baby One More Time' where she dresses up as a sexy school girl and dances around the classroom.
The lyrics of this song - Femme Fatale by Aloe Blacc is a great description of the Femme Fatale. 'Here she comes you better watch your step', 'She's going to break your heart it two, it's true' These are the opening lines are the perfect description of a Femme Fatale.
In 2011 Britney Spears brought out an album called Femme Fatale. Many people can say she is a perfect example of a Femme Fatale as she is very seductive. Especially in her music video 'Hit Me Baby One More Time' where she dresses up as a sexy school girl and dances around the classroom.
Perfect lips
Nobody had symmetrical lips, so using lipstick you can even them out. The best way to start is to stand behind your model and hold a hand mirror in front of their face. This was you can see what needs evening out with lip liner or lipstick
Firstly start with the cupids bow, I used a hard angled eyeliner brush as I feel this is nice and sturdy to draw in lip shapes. Using the brush and an appropriate coloured lipstick, draw in the 'V' for the cupids bow.
You then need to get the angle of the highest part of the lips right, otherwise they will look to fake and drawn on. Do this by softly drawing the outline on the natural lip line, then step back and use your hand mirror to see where you need to expand.
Next, start from the outer corner of the lips and draw the line in towards the cupids bow. Do this on both sides each time stopping and checking that they are even.
Do the above step to the bottom lip, again making sure they look even throughout and colour the whole lip in - you may want to use a softer brush for this part.
Once you are finished, you can tidy the lips up using a cotton bud and some toner as toner is great to remove grease products without them smudging.
Firstly start with the cupids bow, I used a hard angled eyeliner brush as I feel this is nice and sturdy to draw in lip shapes. Using the brush and an appropriate coloured lipstick, draw in the 'V' for the cupids bow.
You then need to get the angle of the highest part of the lips right, otherwise they will look to fake and drawn on. Do this by softly drawing the outline on the natural lip line, then step back and use your hand mirror to see where you need to expand.
Next, start from the outer corner of the lips and draw the line in towards the cupids bow. Do this on both sides each time stopping and checking that they are even.
Do the above step to the bottom lip, again making sure they look even throughout and colour the whole lip in - you may want to use a softer brush for this part.
Once you are finished, you can tidy the lips up using a cotton bud and some toner as toner is great to remove grease products without them smudging.
Eyeliner
I decided to use Aquacolour to create my perfect eyeliner as I feel I can work best with this product. I also new greasepaint would be easier to smudge and aquacolour dries very quickly.
I used an angled eyebrow brush because I felt like I had more control over a brush like this. I slightly wet it and dipped it in the black aquacolour. I only made it slightly wet because I didn't want it to run down my model's face.
I asked my model to close her eye and I started in the middle of her eyelid. I dragged the brush out to the outer corner of the eye and drew a thickish line.
Next, I added a touch more product to my brush and thinned the line out towards the inner corner of her eye.
I then asked her to open her eye so I could apply the flick. If your model's eye is open, it is easier to see where to join the flick to the edge of the eye. I slowly did this and asked her to keep still until the product dried. This was my first time I had ever done winged eyeliner and I was very pleased with the outcome.
I used an angled eyebrow brush because I felt like I had more control over a brush like this. I slightly wet it and dipped it in the black aquacolour. I only made it slightly wet because I didn't want it to run down my model's face.
I asked my model to close her eye and I started in the middle of her eyelid. I dragged the brush out to the outer corner of the eye and drew a thickish line.
Next, I added a touch more product to my brush and thinned the line out towards the inner corner of her eye.
I then asked her to open her eye so I could apply the flick. If your model's eye is open, it is easier to see where to join the flick to the edge of the eye. I slowly did this and asked her to keep still until the product dried. This was my first time I had ever done winged eyeliner and I was very pleased with the outcome.
Finger waves
Finger
Waves
Equipment
·
Waterspray
·
Comb
·
Long hair clips
·
Hairbrush
Method
1.
Brush all the
hair so there are no knots.
2.
Section off a
front part of hair and put the rest of the hair into a fancy updo.
3.
Spray the front
section of the hair so it is quite wet and comb it through so it is flat
against the head.
4.
With the comb,
push the down and towards the models face.
Do this a few times until there is a clear wave, then secure with a
clip.
5. Next, you need
to use the comb to push the next layer of hair up to create another wave. Once you are happy with it, secure it with a
clip.
6. Continue to do this to the whole section of hair. If you don't have enough clips, you can use your fingers to create the waves.
6. Continue to do this to the whole section of hair. If you don't have enough clips, you can use your fingers to create the waves.
Dirtying down
Dirtying down
Equipment
·
Supracolour palette
·
Tooth stain
·
Tooth stain remover
·
Brown hairspray
·
Brushes
Method
1.
Using a brush and your fingers, apply some
different shades of brown from the supracolour palette all over the face. Be sure to apply the colour to the place your
model would’ve ‘fallen over’.
2.
Slightly spray some brown hairsprays onto the
face. This gives a sprayed dirt effect,
as if a car has been stuck in the mud and has turned its wheels.
3.
Lastly to block out a tooth, use some black
tooth stain. Dry the tooth first then
apply the stain using a brush. Hold the
lip off of the tooth until it is dry.
This shouldn’t take too long. The
only way to get tooth stain off is to use the correct remover, so be sure to
have this when using this certain product.
To dirty down hair
you can use the brown hairsprays to give them a dirty effect. If you are making the hair greasy with
Vaseline, be sure to start at the root and work your way down the hair shaft.
Scaring using moulds
Scars – moulds
Equipment
·
Scar mould
·
Vaseline
·
Gelatine
·
Powder
·
Supracolour palette
·
Prozaide
·
Prozaide remover
·
Brushes
Method
1.
Firstly, Vaseline the mould so the gelatine
doesn’t stick once it has dried in the mould.
2.
Next, after you have melted the gelatine in the
microwave, squirt some into the mould and shake it so it evens out in your
chosen scar.
3.
Once it has dried, apply some powder all over
the gelatine, this is so it doesn’t stick when you are pulling it out of the
mould. With your finger, gently lift the
edges and slowly pull out of the mould. Remember
to powder as you are going along.
4.
Now that the scar is out of the mould you need
to stick it to the skin. Apply some
prozaide to the underneath of the scar and put it onto the skin. Be sure to check all the edges are stuck
down. MAKE SURE YOU HAVE THE PROZAIDE
REMOVER TO REMOVE THE SCAR.
5.
Lastly, using the supracolour palette and a
brush, colour the wound to what you would like it to look like.
Burns
Burns – Gelatine
Equipment
·
Red gelatine
·
Yellow gelatine
·
Tissue
·
Bowl of water
Method
1.
Firstly you need to melt the gelatine in the
microwave. Put the tube into a bowl of
water and put in the microwave for 1-2 minutes.
Keep checking as you don’t want the gelatine to burn/get too hot.
2.
Test the gelatine on your skin before you apply
it to your model so it’s not too hot.
Then squeeze some onto the skin and apply some tissue. Do this all over the skin until you are happy
with your burn.
3.
It is good to use red
and yellow gelatine to get different colour burn effects.
You can also use latex and tissue
to create a burn. You do this by
layering latex and 1ply tissues over the skin.
Then once it has dried apply some supracolour to make it look more like
a burn. I prefer using gelatine as it
looks rubbery and flesh like.
Subscribe to:
Posts (Atom)





