Monday, 5 May 2014

Scaring using moulds


Scars – moulds

Equipment

·         Scar mould

·         Vaseline

·         Gelatine

·         Powder

·         Supracolour palette

·         Prozaide

·         Prozaide remover

·         Brushes

Method

1.       Firstly, Vaseline the mould so the gelatine doesn’t stick once it has dried in the mould.

2.       Next, after you have melted the gelatine in the microwave, squirt some into the mould and shake it so it evens out in your chosen scar.

3.       Once it has dried, apply some powder all over the gelatine, this is so it doesn’t stick when you are pulling it out of the mould.  With your finger, gently lift the edges and slowly pull out of the mould.  Remember to powder as you are going along.

4.       Now that the scar is out of the mould you need to stick it to the skin.  Apply some prozaide to the underneath of the scar and put it onto the skin.  Be sure to check all the edges are stuck down.  MAKE SURE YOU HAVE THE PROZAIDE REMOVER TO REMOVE THE SCAR.

5.       Lastly, using the supracolour palette and a brush, colour the wound to what you would like it to look like.


No comments:

Post a Comment